WGW1002 User Manual
OpenVox Communication Co.Ltd
18
Figure 3-1-15 Save To Other Ports
If you have set like this, you will see many on the Web GUI, you can set whether to check.
Notice: When you do some changes, you need to press “Save” and “Apply”, then “Remain Time”
will show as you set.
Your calling status will show on the main interface.
Figure 3-1-16 GSM Information
Table 3-1-2 Description of Call Duration Limit Settings
Step length value range is 1-120 s, step length multiplied by time of
single call just said a single call duration time allowed.
Definite maximum call duration for single call. Example: if Time of
single call set to 10, the call will be disconnected after talking
10*step seconds.
This function is to limit the total call duration of GSM channel. The
max call duration is between 1 to 65535 minutes.
To Next Page
Loading...
