OpenVox WGW1002 - SIP Codec Settings; Codec Selection Interface

WGW1002 User Manual
OpenVox Communication Co.Ltd
26
DTMF Mode
Set default DTMF Mode for sending DTMF. Default: rfc2833.
Other options: 'info', SIP INFO message (application/dtmf-relay);
'Inband', Inband audio (require 64kbit codec -alaw, ulaw).
Trust
Remote-Party-ID
Whether or not the Remote-Party-ID header should be trusted.
Send
Remote-Party-ID
Whether or not to send the Remote-Party-ID header.
Remote Party ID
Format
How to set the Remote-Party-ID header: from Remote-Party-ID or from
P-Asserted-Identity.
Caller ID
Presentation
Whether or not to display Caller ID.
Advanced: Signaling Settings
Table 4-1-4 Definition of Signaling Options
Options
Definition
Progress Inband
Set default DTMF Mode for sending DTMF. Default: rfc2833.
Other options: 'info', SIP INFO message (application/dtmf-relay);
'inband', Inband audio (require 64kbit codec -alaw, ulaw).
Allow Overlap
Dialing
Whether or not the Remote-Party-ID header should be trusted.
Append
user=phone to URI
Whether or not to send the Remote-Party-ID header.
Add Q.850 Reason
Headers
How to set the Remote-Party-ID header: from Remote-Party-ID or from
P-Asserted-Identity.
Honor SDP Version
Whether or not to display Caller ID.
Allow Transfers
Whether or not to globally enable transfers. Choosing 'no' will disable all
transfers (unless enabled in peers or users). Default is enabled.