EasyManua.ls Logo

OpenVox WGW1002 - SIP Registration and Subscription Settings; SIP Security Configuration

OpenVox WGW1002
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WGW1002 User Manual
OpenVox Communication Co.Ltd
24
Also you can choose registration by This gateway registers with the endpoint, its the same with
None, except name and password.
Figure 4-1-4 Register to Server
Table 4-1-1 Definition of SIP Options
Options
Definition
Name
Display name.
Username
Register name in your SIP server.
Password
Authenticating with the gateway and characters are allowed.
Registration
None---Not registering;
Endpoint registers with this gateway---When register as this type, it
means the GSM gateway acts as a SIP server, and SIP endpoints register to
the gateway;
This gateway registers with the endpoint---When register as this type, it
means the GSM gateway acts as a client, and the endpoint should be
register to a SIP server;
Hostname or IP
Address
IP address or hostname of the endpoint or 'dynamic' if the endpoint has a
dynamic IP address. This will require registration.
Transport
This sets the possible transport types for outgoing. Order of usage, when
the respective transport protocols are enabled, is UDP, TCP, TLS. The first
enabled transport type is only used for outbound messages until a
Registration takes place. During the peer Registration the transport type
may change to another supported type if the peer requests so.

Other manuals for OpenVox WGW1002

Related product manuals