Operating the System 35
DS2200 User Manual - OPEX Corporation use only - not for distribution
General Information
Start Date - Displays the date before
pressing GO, displays the time after
Type of Run - Default job setting or
selected by operator at the start of a batch
Input - Total pages scanned during the
current run
Output - Total pages to be saved in the
batch
Rejects - Pieces that have been rejected
during the current run
Feed Rate - Pages/hour
Active Job Time - Total time for the
current run
Piece Information
Page Name/Page Type - Selected in Job
Setup
Page Sub-Type - Page type sub-category
(if available for current page type)
Average Thickness Value - Thickness of
the piece as determined by the system
Damage Detect Results - Indicator for
whether damage was found on the piece
Character Read - Combined results of
magnetic and optical MICR reads
Barcode Results - Up to 3 per page
Processing Time Used -Time used for
each piece
To Next Page
Loading...
