Opex DS2200 - Page 89

Statistics 89
DS2200 User Manual - OPEX Corporation use only - not for distribution
System Entry Sensor
Blocked
Results when the system entry sensor is
blocked by something when the system is
attempting to start up.
Vertical Turn Sensor
Blocked
Results when the vertical turn sensor is blocked
by something when the system is attempting to
start up.
Stacker Entry Sensor
Blocked
Results when the stacker entry sensor is
blocked by something when the system is
attempting to start up.
Bin 2 Gate Sensor
Blocked
Results when the bin 2 gate sensor is blocked
by something when the system is attempting to
start up.
Bin 3 Gate Sensor
Blocked
Results when the bin 3 gate sensor is blocked
by something when the system is attempting to
start up.
Bin 4 Gate Sensor
Blocked
Results when the bin 4 gate sensor is blocked
by something when the system is attempting to
start up.
Bin 5 Gate Sensor
Blocked
Results when the bin 5 gate sensor is blocked
by something when the system is attempting to
start up.
Stacker Door Open
Results when the stacker door is detected to be
open during a run or when the system is
attempting to start up.
Transport Door Open
Results when the transport door is detected to
be open during a run or when the system is
attempting to start up.
ScanLink Plug-in
Requested a Stoppage
Results when the ScanLink Plug-in has
requested a stoppage.
Too Skewed
Results when a piece is detected to be too
skewed to pass through the system safely.
Table 7: Reasons for stops (continued)