8. 9.
NAUTILUS HYOSUNG ATMS
ROUTER
System Setup >
Terminal IP >
DHCP: Disabled*
IP Address: 192.168.1.91
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.90
DNS: 8.8.8.8 or 8.8.4.4
-2(X) Cancel to Return-
Host Setup >
Host Address >
Address 1&2:
NAUTILUS HYOSUNG ATMS
NAUTILUS HYOSUNG ATMS
ROUTER
ITS Systems Integrators Co Inc
Metavante / PAI / FIS
NRT/TNS
Planet Payment
Switch Commerce
Worldpay / RBS Lynk
*777
443
8007
5306
1440
6661
NAUTILUS HYOSUNG ATMS
You are now ready to initialize your ATM. Once booted, perform a
balance inquiry. If this transaction fails, verify your programming
as outlined in the previous steps. If programming is correct,
please call the OptConnect Customer Care Center at 877-678-
3343 ext. 3 for assistance.
Cardtronics
Columbus Data
Data Stream (ASAI)
DNA (Money Tree)
EFX
Elan/Genpass
1st ISO / First Data / Core Data
5550
6965
30000
8002
9057 or 9056
5166
8440
PROCESSOR PORT
Host Port 1&2:
*Host Setup >
Routing ID: Refer to page 25
*STD1 only
-1(x) Cancel to Return-
Unless otherwise specied by your processor, all URLs should be entered in lower case
Cardtronics
Columbus Data
Data Stream (ASAI)
DNA (Money Tree)
EFX
Elan/Genpass
1st ISO / First Data / Core Data
ITS Systems Integrators Co Inc
Metavante / PAI / FIS
NRT/TNS
Planet Payment
Switch Commerce
Worldpay / RBS Lynk
pos.tnsi.com
atm.columbusdata.net
asaiatmssl.asaiatm.com
atmssl.dnsatm.com
emv.sibisystems.com
pos.tnsi.com
sslgb.1stiso.com
*tls1.itssystems.com or tls2.itsystems.com
eftdebitatm.fns.com
tls1.nrttech.com
atm.planetpayment.net
atm1.switchcommerce.net
tptrans.lynksystems.com
PROCESSOR URL
*Verify with
the processor,
which URL
AND PORT
is to be used
with the ATM.
*If your ATM will not be setup for
RMS RECEIVE, you can use DHCP
ENABLED
*Verify with
the processor,
which URL
AND PORT
is to be used
with the ATM.
* For FirstISO
= SSL Length
without
( W / O ) E T X
with Routing
ID: FSTISO
in the Host
Setting
To Next Page
Loading...
Need help?
General
