OptConnect COMPLETE User Manual

10. 11.
HANTLE/GENMEGA ATMS
ROUTER
ITS Systems Integrators Co Inc
Metavante / PAI / FIS
NRT/TNS
Planet Payment
Switch Commerce
Worldpay / RBS Lynk
eftdebitatm.fns.com
tls1.nrttech.com
atm.planetpayment.net
atm1.switchcommerce.net
tptrans.lynksystems.com
-1(x) Cancel to Return-
Host Setup >
Routing ID: Refer to Page 25
Check F7 - MAC Verication and make sure this is Disabled
-2(x) Cancel to Return-
You are now ready to initialize your ATM. Once booted, perform a balance inquiry.
If this transaction fails, verify your programming as outlined in the previous steps.
If programming is correct, please call the OptConnect Customer Care Center at
877-678-3343 ext. 3 for assistance.
Change Host Port 1&2:
PROCESSOR URL
HANTLE/GENMEGA ATMS
Cardtronics
Columbus Data
Data Stream (ASAI)
DNA (Money Tree)
EFX
Elan/Genpass
1st ISO / First Data / Core Data
ITS Systems Integrators Co Inc
Metavante / PAI / FIS
NRT/TNS
Planet Payment
Switch Commerce
Worldpay / RBS Lynk
PROCESSOR HOST PORT
5550
6965
30000
8002
9057 or 9056
5166
8440
*777
443
8007
5306
1440
6661
1st ISO / First Data / Core Data sslgb.1stiso.com
Elan/Genpass pos.tnsi.com
***ATM IS FACILITATING SSL/TLS ENCRYPTION***
HANTLE/GENMEGA ATMS
ROUTER
HANTLE/GENMEGA ATMS
Customer Setup >
Change Processor >
Communication Type: SSL Pass Through
SSL >
Version: TLS 1.2
Certication: Disabled
-1(x) Cancel to Return-
**Standard 3 Option >
Comm Header: Enable
Status Monitoring: Enable
Use 12 Sequence Number: Disabled
Use TCP/IP CRC: Disabled
-3(x) Cancel to Return-
System Setup>
Device Setup >
ATM TCPIP Setup >
Set TC/IP Mode: Static
IP Address: 192.168.1.91
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.90
Change DNS Server>
Change DNS Server #1: 8.8.8.8
Change DNS Server #2: 8.8.4.4
-3(x) Cancel to Return-
Host Setup>
Host IP Address >
Change Host IP 1&2: enter Host URL
Cardtronics
Columbus Data
Data Stream (ASAI)
DNA (Money Tree)
EFX
pos.tnsi.com
atm.columbusdata.net
asaiatmssl.asaiatm.com
atmssl.dnsatm.com
emv.sibisystems.com
PROCESSOR URL
**Please verify with processor if
set up on STD1 or STD3
* For PAI = SSL Length with ETX
Unless otherwise specied by your processor, all URLs should be entered in lower case
*tls1.itssystems.com or tls2.itsystems.com
*Verify with
the processor,
which URL
AND PORT
is to be used
with the ATM.
*Verify with
the processor,
which URL
AND PORT
is to be used
with the ATM.

OptConnect COMPLETE Specifications

General

Brand	OptConnect
Model	COMPLETE
Category	Modem
Language	English