Technical data and exploded views
- 13 -
optek-sensors AS56, Version 04.2010_1.2US, 15.04.2010
www.optek.com
4.4 Accessories Clamp adapter port AS25-G60
The adapter allows sensor installation with T-pieces with clamp 1.5'' or 2.0''
L14 AM7 (Tri-Clamp).
The adapter made of high-quality bulk material 1.4435 (SS 316 L) combines
Clamp technology with the AS25-G60 weld-in port.
As standard, the adapter is delivered without hinged clamp and gasket.
The sensor is inserted into the pipeline to a different degree depending on the
applied optical path length (OPL):
Fig. 6 Clamp 2.0'' adapter port AS25-G60
Tab. 3 Clamp adapter port AS25-G60
OPL
[mm]
AS56
(L = 35 mm + OPL)
insertion depth max.
[mm]
5 40
10 45
50mm [1.97"]
52mm [2.05"]
58.33mm [2.3"]
6.33mm [0.25"]
Ø25mm [0.98"] H7
Ø30mm [1.18"]
Ø63.9mm [2.52"]
Ø56.5mm [2.22"]
Ø27mm [1.06"]
G1¼''A-ISO 228/1
15mm [0.59"]
To Next Page
Loading...
