Appendix
- 46 -
optek-sensors AS56, Version 04.2010_1.2US, 15.04.2010
www.optek.com
11.4 Decontamination declaration
If you send the sensor and/or sensor body back to us, we need the
contamination declaration to comply with legal regulations and to be able to
protect our staff against possible dangers.
• Clean the component before packaging.
• If possible, use original packaging for returning the component.
• Place the filled out and signed decontamination declaration on top of the
packaging content and add a copy to the transportation documents.
• Send component to:
optek-Danulat GmbH
Emscherbruchallee 2
45356 Essen
To Next Page
Loading...
