Need help?Do you have a question about the OPTICLIMATE PRO 3 and is the answer not in the manual?
Explains how to install the fan outlet on the short side of the unit.
Details required spacing around the unit for proper air suction and noise reduction.
Describes unit mounting for condensation drainage and use of rubber/spring absorbers.
Explains the use of rubber feet on the pallet for unit suspension via thread ends.
Details the routing of the power cable through a rubber feed-through.
Explains the alarm port's connection to detectors and setting options (NO/NC).
Describes connecting the automatic moisture meter, room temperature sensor, and remote control.
Details wiring for the five-core cable connecting outdoor and indoor units.
Lists required circuit breakers and cable thicknesses for different models.
Provides visual guides for connecting cables to terminal strips for 230V and 400V.
Explains specific terminal connections and bridging for 1-phase 230V and 3-phase 400V inverter models.
Describes connecting a timer to switch off heat sources based on room temperature.
Shows examples of compatible timer models (LeGrand, Grasslin).
Recommends placing the outdoor unit in a cool, open area with adequate airflow.
Details how to connect refrigerant hoses, including handling and tightening.
Explains connecting the five-core cable to the outdoor unit's terminal box.
Explains how to connect the condensation drain to a hose or pipeline, with options for reuse.
Illustrates correct and incorrect drain pipe installations, mentioning lift pumps and siphons.
Lists and explains the functions of each button on the remote control.
Describes how to turn the unit on/off and switch between day/night modes.
Explains how to adjust the fan speed, including automatic mode.
Explains how inverter models adjust capacity based on fan speed settings.
Details how to set the desired temperature and time using the remote control.
Explains manual/automatic switching and timer programming for day/night cycles.
Provides an example for setting timer ON/OFF times and how to delete them.
Describes dehumidification operation during night and day modes, including PRO4 specific function.
Explains how to view readings from all seven temperature sensors.
Details how to view error codes, understand their meaning, and manage the error log.
Explains how to configure the alarm port for different detector types.
Describes the compressor active mode and how to control heating elements.
Explains the meaning of symbols for outdoor fan operation and unit status.
Allows individual switching of heating elements on/off.
Configures the temperature threshold for switching off heating elements.
Configures auto-restart after power loss and enables night cooling mode.
Enables pre-heating before day mode and slow cool-down after day mode.
Configures dual room operation and alarm port behavior (NO/NC).
Sets the temperature difference for compressor cycling.
Defines the minimum and maximum adjustable heating temperatures.
Defines the minimum and maximum adjustable cooling temperatures.
Configures anti-freeze protection and triggers for cooling block overheating alarms.
Allows calibration of room and cooling block temperature sensors.
Compensates readings for outdoor refrigerant return and dual room sensors.
Adjusts compressor idle time and controls display lighting.
Sets conditions for outdoor fan activation and waiting time.
Configures limits for outdoor air temperature and compensates various sensors.
Enables or disables the unit's buzzer for alerts.
Configures temperature units (C/F) and super dehumidification mode.
Details regular checks for leaks, filter cleaning, and carbon filter replacement.
Guides on diagnosing issues like no power, phase problems, and strange noises.
Lists typical values for the seven temperature sensors in the unit.
Provides detailed explanations for error codes E:01 through E:09.
Provides detailed explanations for error codes E:10 through E:16.
Explains error codes related to temperature sensor connection or defects.
Lists and describes optional accessories like vibration absorbers and lift pumps.
Explains how to activate and use the PRO4's day mode dehumidification feature.
A summary list of error codes from E:01 to E:13 with brief descriptions.
A summary list of error codes from E:14 to E:20 with brief descriptions.
General| Brand | OPTICLIMATE |
|---|---|
| Model | PRO 3 |
| Category | Inverter |
| Language | English |
To Next Page