Opticon MDI-4000 Series - Page 79

MDI-4000 Series Serial Interface Manual
67
EAN/JAN-8 Add-On 2 Digits Transfer Data Format
Digit
Description
Data
7 digits
CD
1 digit
Add-On
2 digits
EAN/JAN-8 Add-On 5 Digits Transfer Data Format
Digit
Description
Data
7 digits
CD
1 digit
Add-On
5 digits
EAN/JAN-8 CD Transfer
Lets you configure the EAN/JAN-8 check digit (CD).
EAN/JAN-13 Optional Settings
Symbology
Setting
Command
Description
Default
EAN/JAN-13
CD
Transmission
6K
Transmit EAN/JAN -13 CD
✓
6J
Not transmit EAN/JAN-13 CD
Add-on
2 digits
JH
Enable single EAN/JAN -13 Add-on 2 digits
JV
Add enable EAN/JAN -13 Add-on 2 digits
[X4N
Disable EAN/JAN -13 Add-on 2 digits
Add-on
5 digits
JI
Enable single EAN/JAN -13 Add-on 5 digits
JW
Add enable EAN/JAN -13 Add-on 5 digits
[X4P
Disable EAN/JAN -13 Add-on 5 digits
EAN -13
EAN-13
Forced add-
on
-G
When EAN-13 start at 378/379/529; Enable
EAN forced add-on
-H
When EAN-13 start at 378/379/529; Disable
EAN forced add-on
✓
-C
When EAN-13 start at
434/439/414/419/977/978; Enable EAN
forced add-on
-D
When EAN-13 start at
434/439/414/419/977/978; Disable EAN
forced add-on
✓
ISBN
Conversion
IB
Disable ISBN conversion
✓
IA
Enable ISBN conversion
IK
When possible, enable ISBN conversion
ISSN
Conversion
HN
Disable ISSN conversion
✓
HO
Enable ISSN conversion
4V
When possible, enable ISSN conversion
ISMN
Conversion
IO
Disable ISMN conversion
✓
IP
Enable ISMN conversion
IQ
When possible, enable ISMN conversion