U
U
s
s
e
e
r
r
m
m
a
a
n
n
u
u
a
a
l
l
16
This menu contains:
Time Setting: Defines time mode. If user choose “Auto”, time will be taken from broadcast. Then user
also must define time offset accordingly to localization. If user choose “Manual”, also must define date
and time manually using below functions:
Summer Time: In auto mode, enables additional time offset for summer time.
Time zone: In auto mode, defines time difference of the local time zone from the GMT.
Date: In manual mode enables defining of date manually.
Time: In manual mode enables defining of time manually.
9.3.3. Parental Control
To use the Parental Control function you will be asked to enter your access PIN code. All parental
control features work on a locking concept with the PIN code as your entrance key.
The PIN code is set to 0000 at the factory!
Age Control: Toggle the age rating control with ←,→ buttons, specify a suitable age level.
Change PIN code: Use this function to change your PIN code to other four digit number.
− New PIN: Enter a new four digit PIN code by pressing OK key and the number keys on the
remote control.
− Verify new PIN code: Re-enter the same new four digit PIN code once again to verify that
you got it right.
Menu Lock: After turning ON this, the whole menu could not be changed at will but you enter the PIN
code required
9.3.4. A/V Control
In the Audio/video menu, you can modify the properties of the audio and video signals to suit your TV
and audio equipment.
TV Type: (Pal / Secam) User can select the video format consistent with your TV
TV Scart (optional): (COMP(HD)/CVBS; COMP(SD)/CVBS; RGB) User can select the video format of the
TV SCART output (and also RCA-YPbPr).
Aspect ratio: User can inform the receiver about the display aspect ratio of the TV that is connected to
the receiver. Possible choices are: Auto, 4:3 and 16:9 (wide screen).
Display Format: If the user select display aspect ratio of TV set as “4:3”, then it is possible to select
the preferred aspect ratio conversion scheme where the transmitted program is in “16:9” mode.
The possible choices are:
• Pan & Scan: The receiver interprets pan & scan vectors encoded in the program and crops
the 16:9 input signal for display on 4:3 TV.
• Letterbox: In this mode the original aspect ratio of the 16:9 input video signal is preserved,
thus there are vertical black bars on the top and bottom of the screen.
• Ignore: Use this, if your TV set handles the aspect ratio conversion.
Video Format: With available resolution of 1080i/720p/576p/ Auto, user can select the desired
settings
To Next Page
Loading...
