OPTIKON PULSAR MS - Technical Specifications

PULSAR Minimal Stress Installation and operating Manual
OPTIKON 2000
Cod. 111001EN 2012-02-16 Rev.J
5-2
5.2 TECHNICAL SPECIFICATIONS
PARAMETER SPECIFICATIONS
Manufacturer ........................ OPTIKON 2000 S.p.A.
via del Casale di Settebagni, 13
00138 Rome - Italy
Model: ................................ PULSAR Minimal Stress
Regulatory conformity: ............ 93/42/EEC Directive on medical devices
Technical standards: ............... EN 60601-1 ; EN 60601-1-1 ; EN 60601-1-2
ENVIRONMENTAL SPECIFICATIONS
Storage ............................... temp. range between –10°C and +70°C, humidity 10-100%
(non-condensing)
Operating ............................ temp. range between +10°C and +40°C, humidity 30-75%
ELECTRICAL SPECIFICATIONS
Input voltage: ....................... selectable at 100/120/220/230 Vac
Frequency ........................... 50/60 Hz
Power consumption: ............... 90 VA (Standard) 125 VA (peak)
Fuses: ................................ 220-240 Volt: 2 A T
........................................ 100-120 Volt: 4 A T
IRRIGATION
Fluid delivery: ...................... Gravity fed – eye pressure determined by the height of irrigation
source
Valving element: ................... solenoid
Control: .............................. System footswitch
ASPIRATION
Aspiration pump types: ............ peristaltic
Actuating medium: ................. Pressurized air from external source
Default vacuum range: ............ User programmable