OPTIMUM
MASCHINEN - GERMANY
Description of the basic operation
15 / 06 / 2011 Page 35Description of the basic operation Digital position display DPA 2000/ DPA 2000S ; Version 2.1.2
© 2011
GB
When the sequence number of the point equals to 1, press the key to return to the posi-
tion of the last point on the arc.
III. After completing the arc machining, press the key to return to the standard display.
While the function arc machining, the function can be interrupted by pressing the key and
return to the standard display except for the cases stated above.
To Next Page
Loading...
