Maintenance
Version 1.0.2 - 2020-07-0728 Translation of original instructions
DP26
EN
DP26_GB.fm
5.1 Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
Extremely serious injuries to those working on the drill and
damage to the drill.
Only qualified personnel should carry out maintenance and repair work on the drill.
5.1.1 Preparation
WARNING!
Only work on the drill if it has been disconnected from the power supply.
5.1.2 Restarting
Before restarting, run a safety check.
WARNING!
Before starting the drill you must be sure that
no dangers generated for persons,
the drill is not damaged.
5.2 Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions.
Interval Where? What? How?
Start of work
Drilling machine
"Safety check“ on page 10
Every month
Drilling column and
toothed rod
Oiling
Lubricate the drill column regularly with commercial oil.
Lubricate the toothed rod regularly with commercial
grease (e.g. friction bearing grease).
Every 6
months
V-belt
on drill head
Visual
inspection
Check the V-belts in the drill head for porosity and wear.
To Next Page
Loading...
