Optimus SYSTEM 730 - Radio Operation; Listening to the Radio

14
RADIO OPERATION
LISTENING TO THE
RADIO
1. Repeatedly press
TUNER
to
select the desired band. Select
AM
for AM stations, or
FM1
or
FM2
for FM stations. As you
press
TUNER
,
AM
,
FM1
or
FM2
and the last selected station
appear on the display.
Note
: You can tune to any FM
station when either
FM1
or
FM2
is selected, and you can also
store and recall stations in mem-
ory in the two FM groups (see
“Using Memory Tuning”).
2. Press
TUNING UP
or
DOWN
, or
TUNING
s
or
t
on the remote con-
trol, to tune to the desired sta-
tion. As you press the button,
the frequency number changes
on the display.
To rapidly scan for a station,
press
AUTO/MANUAL
, or
O/
AUTO
on the remote control, so
AUTO
appears on the display.
Then press and hold
TUNING UP
or
DOWN
, or
TUNING
s
or
t
on
the remote control, for about 1
second. When you release it,
the tuner automatically stops at
the next strong station.
To resume manual tuning, press
AUTO/MANUAL
, or
O/AUTO
on
the remote control, so
AUTO
dis-
appears.
Notes
:
• Each time you press
TUNER
or
TUNING
s
or
t
, the System
730 automatically sets
STE-
REO/MODE
to
STEREO
. If the
broadcast is being received in
stereo,
STEREO
appears on
the display.
13-1277.fm Page 14 Wednesday, July 14, 1999 4:11 PM