27
When the tape in TAPE 1
reaches the end, the tape in
TAPE 2 automatically begins to
play.
Note: To briefly stop the tape in
either deck during playback,
press
PAUSE
on the desired
deck. The button locks and the
tape stops. Press
PAUSE
again
to continue playback.
4. At the end of the tape in TAPE 2,
the system automatically stops
the tape. To stop playback on
either deck at any time, press
STOP/EJECT
on that deck.
PLAY
releases.
Notes:
• If you press
STOP/EJECT
on
TAPE 1 during consecutive play,
the tape in TAPE 2 automatically
begins to play.
• To rapidly fast-forward or rewind
a cassette tape in either deck
while the tape is stopped, press
FAST-F
or
REWIND
. The button
locks and the tape fast-forwards
or rewinds.
The System 730 automatically
stops the tape when it reaches
the end. To stop the tape at any
time during fast-forwarding or
rewinding, press
STOP/EJECT
.
RECORDING ONTO A
CASSETTE TAPE
The System 730 lets you record onto
a cassette tape from the CD changer,
radio, another cassette tape, or from
an external microphone (not sup-
plied).
Note: You can also record from an
additional audio source (see “Re-
cording from an Additional Audio
Source”).
Caution: Never try to force down
RECORD
after you remove an erase-
protection tab from a cassette tape
(see “Preventing Accidental Era-
sure”). You might damage the tape
mechanism.
Recording from a CD
Follow these steps to record from a
CD onto a cassette tape.
1. Press
CD
.
CD
, the last selected
CD number, and
TRACK 1
appear on the display.
2. Load the CD(s) you want to
record into the CD changer.
13-1277.fm Page 27 Wednesday, July 14, 1999 4:11 PM
To Next Page
Loading...
