35
USING AN ADDITIONAL AUDIO SOURCE
If you connected an additional audio
source, such as a TV, VCR, turnta-
ble, or an external CD changer or
cassette deck, you can use your Sys-
tem 730 to listen to or record from
that source.
LISTENING TO AN
ADDITIONAL AUDIO
SOURCE
1. Set
VOLUME
(or press
VOLUME
–
on the remote control), to its
lowest setting, and be sure that
the audio source’s volume con-
trol (if any) is also set to its low-
est level.
2. Press
VIDEO AUX
, or
VIDEO
on
the remote control.
VIDEO
appears on the display.
3. Operate the audio source
according to its owner’s manual.
4. Set
VOLUME
(or press
VOLUME
+
or
–
on the remote control) and
the audio source’s volume con-
trol (if any) to the desired listen-
ing level.
RECORDING FROM AN
ADDITIONAL AUDIO
SOURCE
To record onto a cassette tape from
an additional audio source, follow the
steps in “Recording from the Radio,”
with the following changes:
• In Step 1, press
VIDEO AUX
, or
VIDEO
on the remote control, so
VIDEO
appears on the display.
• Begin play on the additional
audio source as instructed in its
owner’s manual after you
release
PAUSE
to begin record-
ing.
13-1277.fm Page 35 Wednesday, July 14, 1999 4:11 PM