21
PROGRAMMED PLAY
You can program the CD changer to
play up to 50 tracks in any order you
choose, and you can program the
same CD and/or track to play more
than once.
Storing/Playing a
Programmed Sequence
1. With at least one CD in the CD
changer and no CD playing,
select a CD by pressing the cor-
responding disc number (1-7), or
press
DISC
then the desired
number on the remote control.
CD
, the selected CD number,
and
TRACK 1
appear on the
display.
2. Track 1 of the current CD is
automatically selected. To select
a different track, press
<<
or
>>
on the main system, or
CD
<<
or
>>
or the desired track
number on the remote control.
As you press it, the track num-
ber changes on the display.
3. To store the selected track,
press
MEMORY
on the remote
control.
MEMORY
flashes for
about 4 seconds, then lights
steadily, and
P-01
(the program
position number) appears for
about 10 seconds.
Note
: If you pressed the desired
track number on the remote con-
trol, the track number flashes on
the display and you must press
MEMORY
within 4 seconds. If the
track number stops flashing
before you press
MEMORY
,
repeat Step 2 then try again.
4. Repeat Steps 1-4 to store up to
50 tracks.
Note
: If you try to store more
than 50 tracks,
FULL
appears
on the display.
13-1277.fm Page 21 Wednesday, July 14, 1999 4:11 PM
To Next Page
Loading...
