9
SETTING THE
CURRENT TIME
1. Press
POWER
to turn on the
System 730, then press
DIS-
PLAY
once.
TIME
and the last-
set time appear on the display.
2. Within 5 seconds, press
HOUR
to change the hour setting or
MINUTE
to change the minute
setting.
Notes
:
• When changing the hour, be
sure to set it the correct AM or
PM hour.
• To rapidly advance the hour or
minute setting, press and hold
HOUR
or
MINUTE
.
•If
TIME
disappears before you
finish setting the hour and
minute, start again from Step 1.
• When power is disconnected or
interrupted, then restored, the
last known time flashes on the
display. If this happens, reset the
time.
INSTALLING
BATTERIES IN THE
REMOTE CONTROL
The remote control requires two AAA
batteries (not supplied) for power.
For the best performance and long-
est life, we recommend alkaline bat-
teries, such as Radio Shack Cat. No.
23-555.
Caution
: Always use fresh batteries
of the required size and type.
1. To open the battery compart-
ment cover, slide it in the direc-
tion of the arrow.
13-1277.fm Page 9 Wednesday, July 14, 1999 4:11 PM
To Next Page
Loading...