36
SPECIAL FEATURES
SETTING A WAKE UP
TIME
Like an alarm clock, you can set your
system to automatically turn itself on
and play the last selected radio sta-
tion, CD, or cassette tape.
1. Press
DISPLAY
three times.
TIME
and the last-set wake-up
time appear, and
WAKE-UP
flashes on the display.
2. Within 5 seconds, press
HOUR
to change the hour setting or
MINUTE
to change the minute
setting.
Notes
:
• When changing the hour, be
sure to set it to the correct AM
or PM hour.
•If
TIME
disappears before
you finish setting the hour and
minute, start again from Step
1.
3. To turn on the wake-up timer,
within 5 seconds, press
STE-
REO/MODE
.
WAKE-UP
lights
steadily on the display.
Note
: If
TIME
disappears
before you press
STEREO/
MODE
, repeat Steps 1 and 3
again.
4. Select the desired radio station,
CD, or cassette tape you want
the System 730 to play when it
turns itself on.
Note
: If you selected a cassette
tape, be sure to press
PLAY
and
PAUSE
on the appropriate deck
(TAPE 1 or 2).
5. Set
VOLUME
(or press
VOLUME
+
or
–
on the remote control) to
the desired listening level, and
select the desired
X-BASS
and
graphic equalizer settings.
6. Press
POWER
to turn off the
System 730. STAND-BY/MUTE
turns on, then the current time
and
WAKE-UP
appear dimly lit
on the display.
13-1277.fm Page 36 Wednesday, July 14, 1999 4:11 PM