32
Recording from an External
Microphone
The System 730 lets you record onto
a cassette tape using an external mi-
crophone with a
1
/
8
-inch plug (not
supplied), such as Radio Shack Cat.
No. 33-2001.
Note
: The system also lets you hear
sound from an external microphone
combined with sound from the radio,
a prerecorded CD or cassette, or an
additional audio source (see “Using
an External Microphone”).
1. Plug the microphone’s
1
/
8
-inch
plug into
MIC
on the front of the
System 730.
2. Press
TAPE
.
TAPE
appears on
the display.
3. Load a blank cassette tape, or
one you want to record over, into
TAPE 2.
4. Press
PAUSE
then
RECORD
on
TAPE 2.
PLAY
automatically
locks down with
RECORD
and
PAUSE
.
5. Press
PAUSE
on TAPE 2 to
begin recording. Any sound cap-
tured by the external micro-
phone is recorded on the tape.
Notes
:
• Follow any instructions pro-
vided with the external micro-
phone for placement of the
microphone to achieve the
best recording results.
• To briefly stop the tape while
recording, press
PAUSE
on
TAPE 2. The button locks and
the tape stops. Press
PAUSE
again to resume recording.
6. To increase the volume of the
microphone’s sound input, turn
MIXING
toward
MAX
. To
decrease it, turn it toward
MIN
.
7. To hear the sound being
recorded, adjust
VOLUME
, or
press
VOLUME
+
or
–
on the
13-1277.fm Page 32 Wednesday, July 14, 1999 4:11 PM
To Next Page
Loading...
