23
Erasing a Programmed
Sequence
To erase an entire programmed se-
quence, while play is stopped, press
and hold
STOP
, or
CD
on the
remote control, for at least 2 sec-
onds.
MEMORY
disappears from the
display.
Notes
:
• If you remove a CD, the CD
changer automatically skips that
disc’s tracks in the sequence.
• When power is disconnected or
interrupted for 50 hours or more,
any programmed sequence is
entirely erased.
CD AND CD CHANGER
CARE TIPS
Although a CD is very durable, you
should handle it with care. We rec-
ommend the following precautions.
• Keep the CD in its protective
case or sleeve when you are not
playing it.
• Keep the CD clean. Your local
Radio Shack store sells a suit-
able CD cleaner kit.
• Keep the CD dry. A drop of
moisture can act as a lens and
affect the laser beam’s focus. If
it gets wet, wipe the CD with a
soft, dry cloth before playing it.
• Do not write on either side of a
CD, especially the non-label
side.
• Handle the CD by its edges to
avoid fingerprints and surface
scratches, which can prevent
the laser from accurately read-
ing the CD. If the CD gets
scratched, use Scratch ‘n’ Fix
(Radio Shack Cat. No. 42-127)
to keep the CD from skipping
during play.
• Do not store CDs in high-tem-
perature, high-humidity loca-
tions.
13-1277.fm Page 23 Wednesday, July 14, 1999 4:11 PM
To Next Page
Loading...