Optimus SYSTEM 730 - Page 18

18
6. To play the last CD you loaded,
press
PLAY
, or
CD
on the
remote control.
To play a different CD, press the
desired disc number, or press
DISC
then the disc number on
the remote control, to select the
CD. Then press
PLAY
, or
press
CD
on the remote con-
trol to begin play.
appears, then the selected
CD begins to play, and its
elapsed play time appears.
Notes
:
• To skip over, search, or repeat
tracks, see “Special CD
Changer Features.”
• To briefly stop play, press
PAUSE
on the main sys-
tem. appears on the dis-
play.
To resume play, press
PLAY
,
or
CD
on the remote control.
disappears.
7. Set
VOLUME
(or press
VOLUME
+
or
–
on the remote control) to
the desired level, and select the
desired
X-BASS
and graphic
equalizer settings.
8. The System 730 automatically
stops play at the end of the high-
est numbered CD loaded in the
system. For example, if you
have four CDs loaded, play
stops automatically at the end of
the fourth CD.
To stop the CD changer at any
time during play, press
STOP
, or press
CD
on the
remote control. and the CD’s
elapsed play time disappear
from the display.
Note
: To display the total playing
time of a selected CD, press
TIME
on
the remote control before or during
play. The total playing time appears
on the display for about 5 seconds.
t
t
t
t
13-1277.fm Page 18 Wednesday, July 14, 1999 4:11 PM