Optimus SYSTEM 746 - Setting the Sleep Timer

13
Note: If
TIME ON
disappears
before you finish setting the hour
and minute, start again from
Step 1.
3. Press
CLOCK
until
TIMER OFF
and the last set end time appear.
4. Press
MIN
and
HOUR
(or
TUNING
and on the re-
mote control) to set the end
time.
Note: If
TIMER OFF
disappears
before you finish setting the hour
and minute, start again from
Step 3.
5. Slide
FUNCTION
to
CD
,
TUNER
,
or
TAPE
to select the desired au-
dio source.
6. Select the desired radio station,
or load the CD or cassette tape
you want the System 746 to play
when it turns itself on.
Note: If you selected a cassette
tape, be sure to press
PLAY
and
PAUSE
on the deck.
7. Adjust the volume and set
E-
BASS
for the desired sound.
8. Press
TIMER
to turn on the timer.
TIMER
appears.
9. Press
POWER/ STANDBY
to
turn off the system. The current
time appears dimly.
Notes:
• If you selected a cassette
tape, be sure to release
PAUSE
on the deck after you
turn off the system.
• To cancel the wake-up timer,
press
TIMER
again so
TIMER
disappears.
SETTING THE SLEEP
TIMER
You can set the system to play up to
90 minutes, then automatically turn
off.
Note: You cannot use the wake-up
timer while using the sleep timer.
1. With power turned on slide
FUNCTION
to
CD
,
TUNER
, or
TAPE
to select the desired audio
source.
2. Tune to the desired AM or FM
radio station, or start the CD or
tape.
3. To turn on the sleep timer, press
and release
SLEEP
on the re-
mote control. You see:
illustration
illustration
13-1294.fm Page 13 Wednesday, July 14, 1999 7:01 PM