Optimus SYSTEM 746 - Automatic Tuning; Memory Tuning; Storing Stations in Memory Manually; Storing Stations in Memory Automatically

16
AUTOMATIC TUNING
You can use automatic tuning to
quickly move up or down to the next
available station in your area.
Hold down
TUNING
or (or
TUNING
and on the remote con-
trol) for about 1 second. The tuner
automatically moves up or down the
band and stops when it finds the
next active station.
MEMORY TUNING
You can store up to 30 radio stations
in memory.
Note:
You can assign one frequency
to each memory location. When you
assign another frequency to the
same memory location, the new fre-
quency replaces the old one.
Storing Stations in Memory
Manually
1. After tuning to the station you
want to store, press
MEMORY
.
MEMORY
appears and
PRO-
GRAM
flashes.
2. While
PROGRAM
flashes, press
PRESET DOWN
or
UP
to se-
lect a memory location number.
illustration
3. Press
MEMORY
again to store
the station in the memory loca-
tion.
Note:
If
MEMORY
disappears be-
fore you store the station, start
again from Step 1.
Storing Stations in Memory
Automatically
To have the system automatically
store the first 30 active FM and AM
frequencies it finds, hold down
MEM-
ORY
for about 3 seconds.
MEMORY
and each memory location number
flash. The system tunes FM frequen-
cies first, then AM. When storing is
complete, all display indicators stop
flashing and the system automatical-
ly tunes to the frequency stored in
memory location 01.
Selecting Stations Stored in
Memory
To recall a preset station, press
PRESET DOWN
or
UP
until the
desired frequency appears.
13-1294.fm Page 16 Wednesday, July 14, 1999 7:01 PM