Optimus SYSTEM 746 - Intro Play; Programmed Play; Programming and Playing a Sequence of Tracks

20
INTRO PLAY
The INTRO function lets you play
the first 10 seconds of each track so
you can quickly find the one you
want.
To use INTRO, press
INTRO
on the
remote control. The CD player be-
gins playing.
You can use random play, repeat
play, and skip during intro play.
To cancel intro play during or after
play, press
INTRO
. If intro is can-
celled during play, the CD player be-
gins normal play.
PROGRAMMED PLAY
You can program up to 32 tracks in
any order you choose.
Programming and Playing a
Sequence of Tracks
1. Press
STOP
until the system
displays the total number of
tracks and the total playing time.
illustration
2. Press
PROGRAM/MEMORY
(or
PROG
on the remote control
).
3. Press
SKIP
or to select
the desired track.
4. Press
PROGRAM/MEMORY
(or
PROG
on the remote control
)
to
store the selected track.
P-02
appears
.
5. Repeat Steps 3 and 4 to pro-
gram additional tracks.
Note:
You cannot store more
than 32 tracks. If you try to store
any track after the 32nd track, it
replaces the first track and
FULL
appears.
6. Press
PLAY/PAUSE
to play
the programmed tracks.
Notes:
• You cannot use random play
while a programmed se-
quence is stored.
• You can repeat (all), skip over,
or search through pro-
grammed tracks.
• To briefly stop programmed
play, press
PLAY/PAUSE
.
appears. To resume play,
press it again.
7. Adjust the volume
and set
E-
BASS
for the desired sound.
illustration
y
13-1294.fm Page 20 Wednesday, July 14, 1999 7:01 PM