22
CASSETTE DECK OPERATION
The system has one cassette deck
for cassette tape playback and re-
cording. The deck has a full-release
auto-stop system to protect tapes
and prevent pinch roller damage.
When a tape reaches the end of a
side, the tape mechanism automati-
cally stops and releases the tape.
LOADING A CASSETTE
TAPE
1. Take up any slack in the tape by
turning the cassette’s hub with a
pencil. If you do not remove ex-
cess slack, the tape might be-
come tangled in the record/
playback mechanism. Avoid
touching the tape.
2. Press (Stop/Eject) to open
the cassette compartment door.
3. Insert the cassette tape into the
tape guides in the compartment
door, with its exposed tape edge
facing down, the side you want
play facing you, and its full reel
to the left.
4. Close the compartment door.
PLAYING A CASSETTE
TAPE
After loading a cassette tape, follow
these steps to play it.
1. Slide
FUNCTION
to
TAPE
.
TAPE
appears.
2. Press (Play). The tape plays
until it reaches the end of the
side, then it automatically stops.
Notes:
• To temporarily stop playback,
press (Pause). Press
again to continue playback.
illustration
illustration
illustration
illustration
13-1294.fm Page 22 Wednesday, July 14, 1999 7:01 PM
To Next Page
Loading...