24
4. Select the desired band and sta-
tion, then press to release it and
start recording. The cassette
records until it reaches the end of
the side, then the cassette deck
automatically stops.
Notes:
• To temporarily stop recording,
press . Press again to re-
sume recording.
• If you record broadcasts from
AM radio, you might hear a low-
volume hum when you play
back the recording. If this oc-
curs, set
BEAT
on the back of
the system to the other position
and try again.
5. To stop recording before it auto-
matically stops, press on the
deck.
Beat switch
location
illustration
Recording from a CD
1. Load a blank cassette tape, or
one you want to record over.
2. Press then (Record). , ,
and lock down.
3. Slide
FUNCTION
to
CD
.
4. Load the desired CD in the CD
player.
5. Select the desired CD track or
program a sequence (if you do not
want to record the entire CD in or-
der).
Note: To copy a CD’s tracks in
random sequence, press
RAN-
DOM
so
RANDOM
appears.
6. Press both on the deck and
PLAY/PAUSE
on the CD
player.
Notes:
• To briefly stop the tape while re-
cording, press . To resume re-
cording, press
again.
• To listen to the CD during re-
cording, adjust the volume and
E-BASS
for the desired sound
.
7. Recording stops automatically
when the tape reaches its end. To
stop the tape at any time during
recording, press .
Note: To stop the CD at any time
during recording, press
STOP
. The
CD’s number of tracks and total
play time appear.
y
13-1294.fm Page 24 Wednesday, July 14, 1999 7:01 PM
To Next Page
Loading...
