15
TUNER OPERATION
1. Slide
FUNCTION
to
TUNER
. The
system automatically tunes to
the station that was playing
when the system was turned off
or when it was last set to
TUNER
.
2. Repeatedly press
BAND
to se-
lect the AM or FM band. The last
selected station in that band ap-
pears.
Notes:
• For the best AM reception, ro-
tate the loop antenna.
• For the best FM reception,
fully extend the FM antenna.
3. Press
TUNING
or (or
TUNING
and
on the remote
control) to tune to the next high-
est or lowest station. The fre-
quency changes on the display.
You can also use automatic tun-
ing (see “Automatic Tuning” on
Page 16) or memory tuning (see
“Storing Stations in Memory
Manually” on Page 16).
Notes:
•
STEREO
appears when the
tuner receives a broadcast in
stereo.
• To improve reception for weak
FM stereo stations, set
ST./
MONO
on the back of the sys-
tem to
MONO
so
STEREO
dis-
appears. The sound is no
longer in stereo, but reception
should improve.
4. Adjust the volume and set
E-
BASS
for the desired sound.
illustration
illustration
illustration
13-1294.fm Page 15 Wednesday, July 14, 1999 7:01 PM
To Next Page
Loading...
