17
CD PLAYER OPERATION
LOADING A CD
1. Slide
FUNCTION
to
CD
.
CD
ap-
pears.
2. Press
OPEN
to open the CD com-
partment.
OPEN
appears.
3. Carefully place a CD over the cen-
ter hub, label side up.
4. After you load the CD, press the
right corner of the door down until
it clicks shut. The system displays
the number of tracks and the CD’s
total playing time.
PLAYING A CD
To play a CD, simply press
PLAY/
PAUSE
after you load it. The CD
begins to play from Track 1.
01
then the elapsed play time appears.
Notes:
• To temporarily stop play, press
PLAY/PAUSE
. appears and
the elapsed timer stops counting.
To resume play, press
PLAY/
PAUSE
again.
• During playback, if the changer is
subjected to a sudden shock or
jolt, the speed of rotation might
change, or some noise might be
produced. This is not a malfunc-
tion.
The system automatically stops play
at the end of the CD’s last track.
To stop the CD player at any time dur-
ing play, press
STOP
. The CD’s total
number of tracks and playing time ap-
pear.
illustration
illustration
illustration
13-1294.fm Page 17 Wednesday, July 14, 1999 7:01 PM
To Next Page
Loading...
