Optimus UP-367 User Manual

UP-67
UP-127
UP-247
UP-367
Nº.
Manual de instrucciones
AMPLIFICADOR
Operating instructions
AMPLIFIER
EspañolEspañol
EnglishEnglish
UP-247

Optimus UP-367 Specifications

General

Brand	Optimus
Model	UP-367
Category	Amplifier
Language	English

Summary

Front View Controls and Indicators

Level Indicator

Indicates how much power is being fed to the line. LED shows max power point.

Program Input Master Regulator

Controls program channel volume by turning clockwise.

Priority Input Master Regulator

Controls priority channel volume by turning clockwise.

Priority Indicator

Lights up when the priority channel is selected.

Protection Indicator

Lights up when the protection circuit is activated.

On/Off Switch

Turns the amplifier on and off when connected to a mains supply.

Rear View Connections

Connection to 230V a.c. Mains Supply

Uses CEE 22 plug for mains connection. Keep unit away from water.

Battery Power Input

For 24V d.c. battery connection in safety installations.

Connection of Signal Mass to Frame

Loudspeakers Line Out

Low Impedance Outputs

High Impedance Outputs

Priority and Program Channel Connections

Priority Channel Connection

Program Channel Connection

Dipswitch Settings

Priority Control Out (Dipswitch no.8)

Priority Control In (Dipswitch no. 7)

PRI-PRO LINK (Dipswitches no. 5 & 6)

Shield - GND Link (Dipswitches no. 1,2,3 & 4)

Ventilation System

UP-367 and UP-247 Fan Operation

UP-127 Fan Operation

Block Diagram

Factory Setup Configuration

Technical Specifications