To Next PageTo Next Page
Need help?Do you have a question about the Optoma EP721 and is the answer not in the manual?
Operating Environment| operating temperature range | 5-35°C |
|---|---|
| humidity | 80% |
| noise level | 30 dB |
Power| power supply | AC Input 100 - 240V |
|---|---|
| power consumption (maximum) | 260 Watts |
| standby power consumption | <10 Watts |
Display| display technology | 0.55” DDR DLP Technology |
|---|---|
| native resolution | SVGA (800 x 600) |
| maximum resolution | UXGA (1600 x 1200) |
Projection| brightness | 2200 Lumens |
|---|---|
| contrast ratio | 2000:1 |
| throw ratio | 1.94 to 2.16:1 |
Weight and Dimensions| weight | 2 kg |
|---|---|
| width | 259 mm |
| height | 73 mm |
| depth | 188 mm |
Safety warnings and precautions for using the projector.
General warnings and maintenance precautions for projector operation.
Guidance on protecting eyes from the projector's light beam.
Lists key technological and functional features of the projector.
Details the items included in the projector's package.
Identifies and labels the main physical components of the projector.
Guides for connecting computers and video sources to the projector.
Step-by-step instructions for projector power management.
How to adjust projector height, zoom, focus, and image size.
Detailed explanation of operating the projector via its control panel.
Explains how to operate the projector using the remote control.
Describes how to navigate and use the projector's OSD menus.
Visual representation of the projector's OSD menu hierarchy.
Adjusting image brightness, contrast, and sharpness.
Adjusting color saturation and the balance of red/green.
Fine-tuning color gains and biases for R, G, B, Cyan, Magenta, Yellow.
Advanced image adjustments like Degamma, BrilliantColor, Color Temp.
How to enable and select available input sources for the projector.
Options for setting the image aspect ratio (4:3, 16:9).
Adjusting overscan, zoom, image position, and keystone distortion.
Configuring the OSD menu language from a list.
Settings for different projector mounting orientations (front, rear, ceiling).
Configuring security verification and usage time limits.
Adjusting signal phase, frequency, and image position.
Configuring menu location, source lock, and high altitude mode.
Adjusting volume, resetting parameters, and managing power settings.
Managing lamp hours, reminders, brightness, and resetting lamp life.
Solutions for common issues like no image or distorted display.
Resolving notebook display problems and image flickering.
Tips for focus, aspect ratio, size, and orientation issues.
Resolving remote control issues and general lamp problems.
Safety warnings and step-by-step instructions for replacing the projector lamp.
Lists supported computer resolutions and video standards.
Details RS232 connector, pinout, and control commands.
Guidelines and specifications for mounting the projector on a ceiling.
Contact information for Optoma offices worldwide for service and support.
FCC compliance, safety regulations, and disposal advice.
