Optoma HD70 - Adjusting the Projected Image; Adjusting the Projectors Height

15
English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height
Tilt-Adjustment
Feet
Elevator Feet
The projector is equipped with elevator feet for adjust-
ing the image height.
To raise the image:
1. Press the elevator button .
2. Raise the image to the desired height angle , then
release the button to lock the elevator feet into posi-
tion.
3. Use screw in feet  to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the
elevator feet into position.
3. Use screw in feet  to fine-tune the display angle.
Elevator Button
1
3
2