20
English
User Controls
The Projector has multilingual On-screen Display
menus that allow you to make image adjustments and
change a variety of settings. The projector will auto-
matically detect the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Controlor
Control Panel.
2 When OSD is displayed, use
keys to select any item in
the main menu. While making a selection on a particular page,
press
or “Enter” key to enter sub menu.
3. Use
keys to select the desired item and adjust the set-
tings by
key.
4. Select the next item to be adjusted in the sub menu and adjust
as described above.
5. Press “Enter” to confirm, and the screen will return to the main
menu.
6. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
On-screen Display Menus
Main Menu
Sub Menu
Setting
To Next Page
Loading...
