Optoma PK201 - Page 34

PK201
Condential
6-4
(3) Choose the source le
''PK201_EDID_All_XX.ini''.
(4) Click ''Open''.
3. Programming
(1) Key in the serial number into the
barcode blank space.
(2) In "Write Source Select", click “Analog”.
(3) Click "Program".
4. When the message “Please change
the cable to VGA” shows on the
screen, click “OK” button.
5.When the message “Please change
the cable to Mini HDMI” shows on the
screen, click “OK” button.
(3)
(4)
(1)
(2)
(3)