Optoma UHD60 User Manual

English
56
ADDITIONAL INFORMATION
Other problems
The projector stops responding to all controls
 If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before
reconnecting power.
Lamp burns out or makes a popping sound
 When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this
happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp,
follow the procedures in the "Replacing the Lamp" section on pages 45-46.
Remote control problems
If the remote control does not work
 Check the operating angle of the remote control is pointed within ±15° to the IR receiver on the
projector.
 Make sure there are not any obstructions between the remote control and the projector. Move to within
7 m (23 ft) of the projector.
 Make sure batteries are inserted correctly.
 Replace batteries if they are exhausted.

Optoma UHD60 Specifications

General

Noise Level	25 decibels
Resolution	4k (2160p)
Contrast Ratio	1000000:1
Aspect Ratio	16:9
Throw Ratio Range	1.39 - 2.22:1 (with tolerance +/- 5%)
HDR	yes
Keystone Effect	no
3D	no
Minimum Screen Size	26.45 inches
Maximum Screen Size	302.2 inches
Focus Adjustment	manual
Optical Zoom	1.6x
Digital Zoom	yes
Minimum Distance	4.2 feet
Maximum Distance	30.5 feet
HDMI 2.2 Ports	1
USB Ports	1
RS-232 Port	1
Video Input	hdmi, vga
Inputs	3.5mm audio, ethernet, hdmi, vga
Sound Mode	stereo
Built In Speakers	yes
Speakers Output	4 watts
Remote Control	yes
OS Compatibility	mac, windows

Weight and Dimensions

Depth	13 inches
Height	6 inches
Width	19.6 inches
Net Weight	16 pounds