optris CS series User Manual

11
Technical Data
2 Technical Data
2.1 Default settings
At time of delivery the unit has the following pre-settings:
Emissivity
0.950
Transmission
1.000
Average time
0.3 s
Smart averaging
active
The default settings can be changed with the optional USB kit (USB adapter cable +
software). If the unit is supplied together with the USB kit the output is already preset
to digital communication (bidirectional).
Smart Averaging means a dynamic average adaptation at high signal edges. [Activation via
software only]. [► Appendix D ]

optris CS series Specifications

General

Brand	optris
Model	CS series
Category	Temperature Controller
Language	English