optris CS series - 1 General Notes; Intended Use

7
General notes
1 General notes
1.1 Intended use
The sensors of the optris CS series are non-contact infrared temperature sensors. They calculate the
surface temperature based on the emitted infrared energy of objects [►7 Basics of Infrared
Thermometry
]
The CS sensors are sensitive optical systems. Use the thread for mechanical
installation only. Avoid mechanical violence on the head – this may destroy the system
(expiry of warranty).
• Avoid abrupt changes of the ambient temperature.
• In case of problems or questions which may arise when you use the infrared
camera contact our service department.