green LED with programmable functions:
• alarm indication (threshold independent from alarm outputs)
• automatic aiming support
• self-diagnostics
• temperature code indication
10 adjustable emissivity and alarm values by variation of supply voltage/ Service mode for analog
min. 10 kΩ load impedance
1)
0...4.6 V at supply voltage 5 VDC; also valid for alarm output
2)
only at supply voltage ≥ 11 V
3)
inverted RS232, TTL, 9.6 kBaud
4)
loadable up to 500 mA if the mV output is not used
5)
High level: > 0.8 V/ Low level: < 0.8 V
To Next Page
Loading...
Need help?
General