Opus Foil Xpress Direct User Manual

PREFACE
Manual Scope
This manual provides introductory and procedural information for operating Foil Xpress
Direct. Keep it in a location where it can be readily referenced. For safe and eective use
of Foil Xpress Direct, it is necessary that you read the entire manual. Before operating Foil
Xpress Direct, you should become familiar with the described operating instructions and
understand the basic system, warnings, cautions, and notes.
Conventions
Observe all warnings and cautions, stated or implied, in the procedures to prevent both
personal injury and equipment damage. Conventions are used in this manual when safety
factors must be considered. These conventions indicate to the operator that extra safety
precautions must be observed. A description of each follows:
Note: This is an example of how notes will appear in the manual. A note provides infor-
mation of which you should be aware while performing an operation.
Caution: This is an example of how cautions will appear in the manual. A caution warns
of potential damage to the system if operating procedures are not strictly followed.
WARNING: This is an example of how warnings will appear in the manual. A warning
informs you that personal injury may result if operating procedures are not strictly fol-
lowed.
GENERAL SAFETY
Start-up Safety
Operate the equipment within the levels of environmental tolerances specified in Appen-
dix A -Specification listed in this manual.
Caution: Only qualified, trained service representatives should repair Foil Xpress Direct.
44
Foil Xpress Direct user guide
EN
Head Force ........................................................................................................ 69
Print Energy ...................................................................................................... 69
Edge Enhancement and Edge Mode ......................................................................... 70
Head Temperature ............................................................................................... 71
Justification ....................................................................................................... 71
Rotate an Image .................................................................................................. 72
Suggestions - Printer Setting .................................................................................. 72
Saving and Loading Properties ................................................................................ 73
Resetting Default Settings ...................................................................................... 73
 MAINTENANCE & TROUBLESHOOTING
Cleaning the Printhead ......................................................................................... 74
Troubleshooting Error Messages .............................................................................. 75
Appendix B - Specifications ................................................................................... 78

Opus Foil Xpress Direct Specifications

General

Brand	Opus
Model	Foil Xpress Direct
Category	Printer
Language	English