Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
■
If any partitions exist on your target disk, it is recommended that you allow the setup
process to create the appropriate partitions. To delete preexisting partitions, proceed to
Step 13.
13.
(Partition Drive, advanced) In the lower portion of the Where Do You Want to
Install Windows dialog, do the following:
a.
Click Delete to delete the selected storage target existing partition
configuration.
A confirmation window appears
b.
Click OK to confirm the partition deletion.
c.
If any additional partitions exist on the target disk, repeat Step a and Step b.
14.
Select (highlight) the disk to which you want to install Windows, then click Next.
Installing a Windows Server Operating System 53
To Next Page
Loading...
