13
Wireless
WLAN Settings
WPS
If your terminal supports WPS, you do not have to input the
password manually once your WPS has been set up.
Push Button Connection (PBC)
Using this method, the router will enter discovery mode. Set
the device you want to connect to the same mode, this may be
achieved by a physical button on your device or as a software
button through your device menu. The devices will scan each
other, then automatically connect the device to the Wi-Fi. You
won't have to enter any password.
STA-Pin
This works in the same manner as PBC but provides additional
security. When the devices scan and nd each other you will
need to enter the PIN into your connecting device to join it to the
wireless network.
Note: If there is no connection, the LED stops blinking after two
minutes.
To Next Page
Loading...