Trueshopping
www.TrueShopping.co.uk
Page: 31 of 71
Starting The Chain Saw
1. Ensure that you have the correct fuel mixture.
2. Make sure the chain brake (the black lever ① in
diagram) is fully pushed forwards into the lock position.
This ensures the chain does not spin freely when
starting. It is very important that you do this to ensure
that you are not injured.
3. Pull out choke lever fully (④ in diagram).
4. Switch on engine switch (⑧ in diagram).
5. Push in the throttle interlock lever on top of the handle
(⑪ in diagram) and engage the locking button the side
of this. This engages the throttle at a slow speed to aid
starting the engine as can be seen in figs 28 to 34.
Figure 27 Parts of the Chain saw
To Next Page
Loading...
Need help?
General
