Trueshopping
www.TrueShopping.co.uk
Page: 55 of 71
Maintenance
Always be sure to turn off the engine before
performing any maintenance or checking
procedures.
Leave all maintenance other than mentioned
in this manual to your servicing dealer.
The metallic parts reach high temperatures
immediately after stopping the engine.
Only use replacement bars and chains
specified by the manufacturer or the
equivalent.
Follow the manufacturer's sharpening and
maintenance instructions for the saw chain.
Always carry the unit with the engine
stopped, the guide bar covered with the
protector to the rear, and exhaust away from
your body.
To Next Page
Loading...
Need help?
General
