EasyManuals Logo

Oregon SL-YD5200B User Manual

Oregon SL-YD5200B
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Trueshopping
www.TrueShopping.co.uk
Page: 56 of 71
Chain Oil
Use motor oil SAE#10W-30 all year round or
SAE #30-#40 in summer and SAE #20 in
winter. Do not use wasted or regenerated oil
that can cause damage to the oil pump.
Changing Oil Supply
Be sure to refill the oil tank every time when refuelling the
unit.
The chain oil flow can be changed by inserting a screwdriver in
the hole on the bottom of the clutch side. Adjust according to
your work conditions. See page 29, fig 25, for details and
image.
Adjusting Carburettor
The carburettor on your unit has been factory
adjusted but may require fine turning due to
change in operating conditions.
Before adjusting the carburettor, make sure
that provided are clean air/fuel filters and fresh, properly
mixed fuel.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oregon SL-YD5200B and is the answer not in the manual?

Oregon SL-YD5200B Specifications

General IconGeneral
BrandOregon
ModelSL-YD5200B
CategoryChainsaw
LanguageEnglish

Related product manuals