Trueshopping
www.TrueShopping.co.uk
Page: 40 of 71
Cut at the correct engine speeds for the size
and position of the sapling, branch or tree. Do
not overreach or cut above shoulder height.
It is not necessary to force the saw into to the
cut, Apply only light pressure while running the
engine at full throttle.
When the saw chain is caught in the cut do not
attempt to pull it out by force but use a wedge
or a lever to open the cut.
Never touch the exhaust, spark plug or other
metallic parts of the engine while the engine is
in operation or immediately after stopping the
engine. Doing so could result in serious burns
or electrical shock.
Do not rely exclusively on the safety devices
built into your saw.
Always shut off the engine before putting it
down.
To Next Page
Loading...
Need help?
General
