Oriental motor BMU6200SC Series User Manual

HM-5153
Brushless Motor and Driver Package
BMU
Series
200 W / 400 W
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
Ôèå¢ÎåøÂÌ¢éóáîå÷âòõóèìåóóíïôïòïææåòåäâùÏòéåîôáìÍïôïò®
Ôèåõôíïóôðåòæïòíáîãåòåñõéòåäæïòôèåíïôïòéóðõòóõåä¬áîä
áììôèåóôòõãôõòåóïæôèåíïôïòèáöåâååîòåîå÷åä®
Ôèéóðòïäõãôáãèéåöåóíïòåãïíðáãô¬èéçèåòðï÷åòáîäèéçèåò
åææéãéåîãùôèáîåöåòâåæïòå®

Oriental motor BMU6200SC Series Specifications

General

Brand	Oriental motor
Model	BMU6200SC Series
Category	Engine
Language	English

Summary

1 Safety Precautions

General Safety and Handling

Key safety warnings, handling rules, and symbol definitions including general precautions.

Installation and Connection Safety

Safety guidelines for installing, wiring, and connecting the product, covering installation and connection.

Operation, Maintenance, and Repair Safety

Safety measures for operating, maintaining, repairing, and modifying the product.

2 Precautions for Use

Product Usage and Environmental Guidelines

Essential precautions for product operation, environment, and specific use cases.

3 Preparation

Product Verification and Model Identification

Verifying package contents and understanding product model naming conventions.

Motor and Driver Combinations

Lists compatible motor, gearhead, and driver models for various configurations.

Motor and Driver Component Identification

Explains the names and functions of key motor and driver parts.

4 Installation

Installation Location and Environmental Conditions

Specifies the required ambient conditions and location requirements for installation.

Motor Mounting Procedures

Instructions for physically mounting the motor, including type-specific steps.

Motor and Gearhead Assembly Details

Steps for assembling motor with gearhead, including cable routing and gearhead handling.

Load Installation and Shaft Load Limits

Guidance on attaching loads to the output shaft and respecting permissible load limits.

Driver Installation and Mounting

Details driver mounting orientation, clearances, and installation methods.

5 Connection

Power Supply Connection Procedure

How to connect the driver to the AC power supply based on voltage input.

Motor, Grounding, and I/O Signal Connections

Connecting motor cables, grounding, and external I/O signals to the driver.

I/O Signal Circuitry and Connection Logic

Explains input/output signal circuits and connection logic for external control.

Wiring Example: Switches and Relays

A wiring example showing motor operation using switches and relays.

Wiring Example: Programmable Controller

Wiring examples for connecting to a PLC using sink and source logic.

6 Operating by Front Panel

Initial Setup: Connection and Power-Up

Steps for connecting the unit and powering it on for the first time.

Front Panel Motor Operation Guide

Instructions for operating the motor, adjusting speed, and stopping using the front panel interface.

7 Operating by Programmable Controller

External Operation Configuration

Setting up the driver for external control via signals from a programmable controller.

Multi-Speed Operation Configuration

How to set up and operate the motor at multiple programmed speeds using external inputs.

Motor Rotation Direction Control Methods

Switching the motor's rotation direction using physical switches and external signal inputs.

8 Convenient Functions

Overview of Available Functions

Lists and categorizes the product's various display and setting functions.

Understanding Panel Displays and Settings

Explains the driver's monitor and data mode screens and their configurable items.

Parameter List and Configuration Details

A comprehensive list of parameters, their functions, setting ranges, and default values.

I/O Signal Functionality and Descriptions

Detailed explanations of input and output signal assignments and their behavior.

Driver Monitor Mode Display Items

Details on what information is shown on the driver's monitor mode, including speed and load.

Setting Up Operation Data Profiles

How to define and select up to four distinct operation data sets for the motor.

Setting Acceleration and Deceleration Times

Methods for configuring acceleration and deceleration ramp times for smooth motor starts/stops.

Data Locking and Speed Range Limitation

Features for preventing accidental setting changes and restricting operational speed ranges.

Load Holding Functionality at Standstill

Explanation of the slight position-keeping function providing holding torque when the motor is stopped.

9 Alarms and Warnings

Alarm Codes, Causes, and Solutions

Lists all alarm codes, their potential causes, and recommended actions for resolution.

Alarm Reset and History Management

Procedures for resetting active alarms and managing recorded alarm events.

Warning Codes and Resolution Steps

Details warning codes, the conditions that trigger them, and how to address them.

10 Troubleshooting and Remedial Actions

Common Operational Issues and Fixes

Systematic guide to diagnosing and resolving common motor and driver operational problems.

11 Inspection

Periodic Inspection Checklist and Procedures

A checklist of items to inspect periodically to maintain the motor and driver.

12 Accessories (Sold Separately)

Recommended Cables and Power Supplies

Information on optional cables and power supply units for system expansion.

13 Reference

Standards Compliance and CE Marking

Overview of product compliance with various industry standards and CE marking.

EMC Directive Installation and Wiring Guidelines

Guidelines for installing and wiring the system to comply with EMC Directive requirements.

EMC Compliance: Wiring, Grounding, and Static Precautions

Best practices for wiring, grounding, and installation to ensure EMC compliance and prevent static discharge.

Technical Specifications Summary

A detailed list of the product's technical specifications, including electrical, mechanical, and environmental ratings.