Orion 250i2 EV CNC - PLAY;PAUSE, UNDO, AND RESET OPTIONS; Prepare the EV Screen to Make a Weld

14
PLAY/PAUSE, UNDO, AND RESET OPTIONS
PLAY/PAUSE  Pressing the Play/Pause icon, toggles between Play and pause. If the Play icon is green, the
welder is capable of making welds anytime a work-piece (connected to the positive alligator clip) makes
contact with the electrode. When paused (White Play icon), users are unable to weld.
UNDO  e Undo icon allows the user to go back through the 5 previous screen taps. is is helpful when a
change is accidentally made.
RESET  e Reset icon resets all the variables and parameters on the screen back to the factory default
settings.
Prepare the EV Screen to Make a Weld
Be sure to press the “Play” button in the lower left corner to enable welds.