R1 ChrVo? R1 Voice Chorus Depth
R2 ChrVo? R2 Voice Chorus Depth
Lf ChrVo? Left Voice Chorus Depth
Press [ENTER] button to confirm, use the [+/-] buttons to adjust the value: 00-63
To select the default value press the [+/-] buttons at the same time.
OCTAVE
Press the [FUNCTION] button to select R1 Octav?, use the [+/-] buttons to select R2 Octav?
and
Lf Octav?
R1 Octav? Right 1 Voice Octave
R2 Octav? Right 2 Voice Octave
Lf Octav? Left Voice Octave
Press [ENTER] button to confirm, and use the [+/-] buttons to set the octave value: -2 to +2
To select octave 0 (zero) press the [+/-] buttons at the same time.
SPLIT POINT
In this page, you can set the split point for your keyboard.
Press [FUNCTION] button to select SplPoin.
Press [ENTER] button to program the split point and use the [+/-] buttons to set the split point.
Range: 00-87.
The default value is 34 and it corresponds to G2.
MIDI R1
In this page, you can select MIDI settings.
Press [FUNCTION] button to select MIDI R1?, use the [+/-] buttons to select MIDI R0,
MIDI R2, MIDI S0, MIDI S1, MIDI S2, MIDI S3.
Press [ENTER] to confirm, and use the [+/-] buttons to set the parameters.
MIDI R0------Reception Disabled
MIDI R1------Reception Enabled, this setting is dedicated for computer interface (default mode).
MIDI R2------Typical configuration for a MIDI Accordion or Master keyboard.
The sections are set automatically as follows:
R1 Ch 1
R2 Ch 4
Left Ch 2
Bass Ch 3
MIDI S0------Transmission Off
MIDI S1------Selecting R1 Ch
MIDI S2------Selecting Lf Ch
24
To Next Page
Loading...
